-Choatrue's Blog

在FC12下使用联通的中兴MF637U无线3G上网卡

[

2010/07/13 09:27 | by choatrue ]

首先，安装usb_modeswitch。
yum install usb_modeswitch
=============================================================================================================================
软件包                          架构               版本                        仓库                                    大小
=============================================================================================================================
正在安装:
usb_modeswitch                  i686               1.1.2-3.fc12                Everything-mirrors.163.com              46 k
为依赖而安装:
tcl                             i686               1:8.5.7-5.fc12              Everything-mirrors.163.com             1.9 M
usb_modeswitch-data             noarch             20100418-2.fc12             Everything-mirrors.163.com              32 k

事务概要
=============================================================================================================================
安装       3 软件包
更新       0 软件包

总下载量：2.0 M
Installed size: 4.5 M
我用的163的源，可以直接找到这个软件。
其次，修改配置文件
less /etc/usb_modeswitch.setup
/637（因为我的上网卡是637的，先确认自己的上网卡在支持列表中。。。可参考usb_modeswitch的官方主页，有支持的网卡型号）
找到后，修改
# ZTE MF637
#
# Contributor: Joakim Wennergren and others

DefaultVendor=  0x19d2
DefaultProduct= 0x0031

TargetVendor=   0x19d2
TargetProduct=  0x0031

# only for reference and 0.x versions
# MessageEndpoint=0x01

MessageContent="5553424312345678000000000000061b000000030000000000000000000000"

其中的0x19d2和0x0031，请参考你自己的本机。
lsusb
[root@choatrue dev]# lsusb
Bus 005 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04fc:05da Sunplus Technology Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 011: ID 19d2:0031 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
以上是我的机器的显示内容。。。

最后，切换成猫。。。
usb_modeswitch -W
Reading config file: /etc/usb_modeswitch.setup

* usb-modeswitch: handle USB devices with multiple modes
* Version 1.1.2alpha (C) Josua Dietze 2010
* Based on libusb0 (0.1.12 and above)

! PLEASE REPORT NEW CONFIGURATIONS !

DefaultVendor=  0x19d2
DefaultProduct= 0x0031
TargetVendor=   0x19d2
TargetProduct=  0x0031
TargetClass=    not set

DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
GCTMode=0
MessageEndpoint= not set
MessageContent="5553424312345678000000000000061b000000030000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
Interface=0x00

InquireDevice enabled (default)
Success check disabled
System integration mode disabled

usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 002 on 005
usb_os_find_devices: Found 001 on 005
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 002 on 002
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 011 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device

Looking for target devices ...
  searching devices, found USB ID 0483:2016
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 04fc:05da
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 19d2:0031
   found matching vendor ID
   found matching product ID
   adding device
  searching devices, found USB ID 1d6b:0002
Found devices in target mode or class (1)
Looking for default devices ...
  searching devices, found USB ID 0483:2016
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 04fc:05da
  searching devices, found USB ID 1d6b:0001
  searching devices, found USB ID 19d2:0031
   found matching vendor ID
   found matching product ID
   adding device
  searching devices, found USB ID 1d6b:0002
Found devices in default mode or class (1)
Accessing device 011 on bus 001 ...
Using endpoints 0x01 (out) and 0x81 (in)
Not a storage device, skipping SCSI inquiry

USB description data (for identification)
-------------------------
Manufacturer: ZTE,Incorporated
     Product: ZTE WCDMA Technologies MSM
  Serial No.: P673A3UCCM010000
-------------------------
Looking for active driver ...
USB error: could not get bound driver: No data available
No driver found. Either detached before or never attached
Setting up communication with interface 0 ...
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye.
这是我的机器的显示。。。然后，在网络管理中会出现china unicom的可用网络。。。